Choosing a new cooktop is one of the few kitchen decisions where energy labels, outdated guides and real-world wiring all collide. Induction has become the default recommendation for electric kitchens, yet the numbers most often quoted to justify it date back more than a decade. Meanwhile, gas hobs are measured on a completely different scale, and the power rating on your contract may not survive a four-zone induction session. Here is what the current data actually says.
- Induction is more efficient, but by less than commonly claimed: Manufacturer datasheets from October 2026 show savings of roughly 6–8% per kilogram of heated water versus radiant ceramic, not the 20% figure from a 2011 IDAE guide.
- Cookware must be magnetic: A simple magnet test determines compatibility. Stainless steel, aluminium or copper without a magnetic base, as well as glass, wood, porcelain, ceramic and clay, will not work on induction.
- Contracted power is the hidden constraint: A typical induction hob defaults to 7.1 kW, while Spanish households average between 3.45 and 4.6 kW. Power-limiting functions can bridge the gap without upgrading the supply.
- Gas follows different rules: Efficiency is expressed as a percentage, not watt-hours per kilogram, and network-fed installations require a periodic inspection every five years.
How much electricity does induction really save?
The most repeated statistic in Spanish kitchen renovations is that induction consumes 20% less electricity than conventional ceramic hobs. That figure comes from the third edition of the IDAE’s Practical Energy Guide, published in July 2011, which also described induction as faster and more efficient than other electric cooktops. The 2007 edition, still available on the agency’s website, made the second claim without the percentage.
A more current comparison exists. Since 2014, EU Regulation 66/2014 has required electric hobs to be measured in watt-hours per kilogram of water heated, with a maximum of 195 Wh/kg from five years after entry into force. Manufacturers publish this figure on the product datasheet. Three Balay models dated October 2026 illustrate the gap: the radiant 3EB765LQ declares 190.9 Wh/kg, while the induction 3EB861EN and 3EB864FR declare 180 Wh/kg and 175 Wh/kg respectively. That translates to roughly 6–8% less energy per kilogram heated — a real advantage, but far from the headline 20%.
The bigger savings come from technique rather than technology. The 2011 IDAE guide notes that keeping 1.5 litres of water at a boil in an open pot with a poor base demands 850 W, against 150 W in a thick-based pressure cooker, and that covering the pot saves up to 25%. Induction still earns its place for speed and control, but the case is weaker when framed purely as a bill-cutting measure.
Why gas cannot be compared on the same scale
Gas hobs are regulated differently. The same European framework sets a minimum efficiency of 55% for gas burners — the share of the gas energy that reaches the cookware. A Balay gas hob, the 3ETX463MB, declares 56.0%. Placing that percentage beside an electric hob’s Wh/kg figure would be meaningless, and the 2014 EU energy label, under Delegated Regulation 65/2014, covers ovens and hoods but not hobs, so there is no letter grade in the showroom to guide buyers.
The IDAE guides from 2007 and 2011 state that electric cooktops are generally less efficient than gas, without specifying the criterion. That assertion is now more than fifteen years old and should not decide a renovation on its own. What actually decides the running cost is the price paid per kWh of gas versus electricity under each household’s contract.
Cookware, power limits and safety checks
Induction requires pots and pans that attract a magnet. The user manual for the Hisense HI6321BSCE suggests exactly that test: if the magnet sticks to the base, the pan will work. The induction symbol on packaging or on the base is an equally reliable indicator. According to the same manual, stainless steel, aluminium or copper without a magnetic base will not work, nor will glass, wood, porcelain, ceramic or clay. Bases must be flat and matched to the zone size, since a pot smaller than 140 mm may not be detected. The manual also warns that some cookware may crackle or hum and that the hob’s fan may keep running after switch-off — neither is a fault.
Ceramic hobs have no such requirement. The IDAE recommends thick, diffusing bases for electric cooktops and switching off about five minutes before the end of cooking to use residual heat — a trick that explicitly excludes induction.
Power is the next consideration. The Hisense hob in the example runs at a default maximum of 7.1 kW, and its energy-management function allows that to be limited to 2.5, 3.5, 4.5 or 5.5 kW. Those figures sit awkwardly against average Spanish household contracted power, which ranges between 3.45 and 4.6 kW. Exceeding the contracted limit causes the smart meter to cut the supply even when no breaker in the panel has tripped. Before paying to increase capacity, limiting the hob is the cheaper first step.
Installation matters too. Spain’s low-voltage electrotechnical regulation reserves a dedicated circuit for the kitchen and oven, designated C3, rated at 5,400 W with a 25 A breaker and 6 mm² cable. In older kitchens, or where the circuit is shared, an installer should inspect it before the new hob goes in.
Safety profiles differ by technology. Induction produces no flame or gas, and heat is generated in the cookware itself. The Hisense manual advises anyone with a pacemaker or other electronic implant, such as an insulin pump, to consult their doctor or the implant manufacturer first. Gas, by contrast, imposes a maintenance obligation: the ITC-ICG 07 of the technical regulation for gaseous fuels sets a periodic inspection every five years for installations fed from the network, with the same frequency for bottled butane or propane systems.
For most electric kitchens, induction remains the strongest choice — for speed, easy cleaning and precise control rather than for a 20% saving that no longer reflects current datasheets. Before buying, check three things: whether your pans attract a magnet, how much power you have contracted, and the condition of the kitchen circuit. For households switching from gas, the decision rests on tariff prices, not on a guide published in 2011.